|
|
|
|
|
|
|
[Sell]
U Type Wire |
 |
|
Material: Electric Galvanized Iron Wire, Hot-Dip Zinc-Plating Iron Wire, Black Iron Wire.
Application: U type wire of different sizes as baling wire or binding wire in construction.
Size: Detail specifications can be produced according to client's request.
|
|
» Posted by: Anping First Binding Wire Factory [China]  |
|
|
|
|
|
[Sell]
Galvanized Tie Wire |
|
|
We manufacture and provide quality Galvanized Iron Wire ( low carbon steel wire ) for redrawing and industrial use, mainly electro galvanized wire, hot-dip galvanized iron wire, tie wire, black iron wire, annealed iron wire, cut wire, etc.
Galvanized iron wire can be classified into hot-dipped galvanized iron wire and electro galvanized wire according to the differences of processing.
Sizes of hot-dipped galvanized wire: 8# to 36#(wire diameter ranging from 3.8mm to 0.19mm).
Sizes of electro galvanized wire: 8# to 38# (wire diameter ranging from 3.8mm to 0.15mm).
Applications of galvanized wire: Communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Box Wire |
|
|
| Boxed wire is available in 10, 11, and 12 gauge. Box Size: Available in 50 and 100 pound boxes.Wire Type: Boxed wire is available in Galvanized or Black Annealed.">Gauge: Boxed wire is available in 10, 11, and 12 gauge. Box Size: Available in 50 and 100 pound boxes. Wire Type: Boxed wire is available in Galvanized or Black Annealed. |
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Stainless steel tie wire with 304, 316 type for S.S woven wire |
|
|
We are especially experienced in producing stainless steel fine wire.
Features of Stainless Steel Wire: High strength, excellent anti-corrosion property, good preventing and anti-radiating property.
Applications of Stainless Steel Wire: Airspace, military, medicine, chemical industry, petroleum chemical, etc.
Specifications: 0.018 to 0.9mm. Custom orders accepted.
Materials for Stainless Steel Fine Wire: 304,304L, 316, 316L.
Wire Diameter: 5mm to 0.025mm
Applications: Stainless steel wire is used in wire-drawing, weaving of wire mesh, soft pipe, beam of cabinet, steel wire rope, filter material and equipment, spring, etc.
Stainless Steel Wire Variety According to Applications: Stainless Steel Weaving Wire; Stainless Steel Brush Wire; Stainless Steel Stitching Wire; Stainless Steel Spring Wire; Stainless Steel Nails Wire
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Binding Wire |
|
|
To avoid frequent maintenance, binding wire has been increasingly applied to daily life and high grade leisure venues. Our binding wire, made of low-carbon steel coil wire, offers good corrosion resistance and clean surface treatment. It is now widely used in many leisure entertainment sites, family and enterprises and construction industry for bundling and tying of wire.
The main products which producted by us include: U type wire, cut wire, single loop bale ties, quick link bale ties, galvanized tie wire, stainless steel tie wire, box wire, rebar tie wire, PVC coated wire, and so on.
|
|
| » Posted by: Anping First Binding Wire Factory [China] |
|
|
|
|
|
[Sell]
Sieve Shakers |
|
|
8" Sieve Shakers
8" SS-15 Sieve Tester is a budget, portable, 8" / 203mm sieve shaker designed to outperform other comparably priced equipment. The 1/4-hp unit is widely accepted by state transportation departments for highway materials testing. Back and forth lateral motion is combined with up and down and tilting motions to cause test material to travel in an orbit on the sieve surfaces. This forced travel assures full use of sieve mesh area without precise leveling of the tester. The SS-15 is recommended primarily for No. 4 to No. 200 size range, but may be used with larger material sizes when specifications for sieve loading and sample quantities permit. The Tester holds 6 full-height sieves and pan or 13 half-height sieves and pan. Clamp bar with attached cover secures sieves. The 15-minute timer has an adjustable knob-stop for improved repeatability, and a "hold" feature for continuous running. Freestanding operation is normal, but may be mounted via holes provided in bottom end flanges.
3" Sieve Shakers
3" / 76 mm Sieve Shaker is designed for small samples of chemicals, minerals, pharmaceuticals, powdered metals, cosmetics, abrasives, ores, foods, and other fine powders. Useful range is 75 μm - 4.75 mm (No. 200 to No. 4 sieve sizes) with woven wire sieves, but many materials may be sized smaller using electroformed sieves.
High frequency, 3600 vpm, electromagnetic vibratory action with 0-100% amplitude control is ideal for fine particle separations. Inline solenoid-actuated tapping action may be used during vibration (60 taps/min.) to speed dry separations. Also use the tap separately for tap-settling and bulk density tests. During dry sieving, the tapping action redistributes the sample on the sieves, and breaks static blinding, helping to clear undersize particles rapidly.
Model SS-3 includes a platform assembly for up to seven full-height. 3" / 76 mm metal sieves and pan or 14 acrylic sieves and pan. The unique sieve clamping mechanism makes insertion and removal of the sieve stack simple and convenient, yet holds the sieves snugly during operation. The captive knobs on the clamping mechanism allow it to be raised with a quick twist, releasing the sieves. The mechanism remains at this height until the knobs are twisted in the opposite direction clamping the sieves in place. The Performer III’s compact size, small footprint, and quiet operation make it an extremely desirable instrument for dry powder sample separations.
Model SS-3 features include an attractive, but rugged coated steel case, on/off controls for vibration and a manual/timed mode switch. A digital timer showing time set and time remaining, the numbered vibration control knob, and simple, efficient electromagnetic vibratory action enable the Performer III to give reliable, repeatable results. Optional stackable acrylic 3" / 76 mm see-through cylinder is helpful for observing sample action while leveling platform or for setting vibration.
Quiet, electromagnetic vibratory action.
0-100% amplitude control.
Switchable tapping action.
Precise digital timing.
Heavy Duty Shaker
Heavy Duty motorized sieve shaker holds up to 10 full height 2" deep, 20 half height 1" deep plus pan and cover. The shaker has a three way shaking action. Each revolution imparts a horizontal and vertical movement and a jolting action. The platform moves side to side with a jolt at each change of direction, plus a slight upward movement. This creates a quick efficient movement and separation of material. The unit is designed with Heavy Duty steel parts and there are no chains, belts, or flywheels, to wear out, which minimizes downtime and results in a longer lasting shaker.
Can accomodate 8" and 12" Sieves
Side to Side and tapping motions
More capacity than most other sieve shakers
Heavy duty tubular steel construction for rigidity and stability
Heavy duty 1/3 horsepower motor
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Accessory Equipment |
|
|
Lids & Receivers
Lids, receiving pans and intermediate receiving pans are available in brass or stainless steel with the following diameters: 38, 100, 150, 200, 250, 300, 315, 400 and 450 mm as well as 3, 8, 12 and 18 inches. Half height receivers are also available.
Pocket Sieve Set
High quality pocket sieves are very useful for testing small samples either in the laboratory or on site. The brass sieve has a range of interchangeable mesh discs of different aperture sizes. It is supplied complete with a sieve brush and belt pouch.
Sieve Brush & Analysis Graph Paper
Double ended sieve brushes specially designed for cleaning sieves with one end coarse bristles and the other fine. Graph paper for the rapid analysis of sieve test data. Pad contains 25 sheets printed on semi-transparent detail paper to allow direct comparison of graphs.
Sample Dividers
These hand held sample dividers will subdivide material samples into smaller portions while retaining the characteristics of the original sample.
Produced in stainless steel with slot widths or either 6.35 mm (1/4 in) or12.7 mm (1/2 in).
Wet Sieving Kit
For tests that require wet sieving Hengfeng offer conversion kits suitable for the Octagon and EFL shakers. Each kit includes top clamping plate with a perspex cover and spray rose, watertight seals and a stainless steel receiver with drainage spout.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Special Sieves |
|
|
Half Height Sieves
Where smaller quantities of sample are being analysed half height sieves are often used. These are available in diameters of 100, 150, 200, 250, 300, 315, 350, 400 and 450 mm, as well as 8, 12 and 18 inches with the complete range of woven wire mesh or perforated plate sieving media.
Microplate Sieves
For very fine particle size analysis Hengfeng produce a range of microplate sieves made from electro-formed nickel plate in stainless steel frames of 100 mm diameter. Available with unique self clearing apertures in sizes from 5 μm upwards.
Wet Washing Sieves
For samples that need to be separated with the help of wet washing. Available in 8 inches diameter by 4 or 8 inches deep and 200 mm by 100 mm or 200 mm with brass or stainless steel frames.
A complete range of aperture sizes with optional support medium for fine mesh.
Extra Depth Sieves
Extensively used by the construction and cement industries. These extra depth sieves are available with a diameter size of 450 mm and a depth of 300 mm. Made from stainless steel with woven wire mesh or perforated sieving media.
Air Jet Sieves
These sieves are specifically designed for use with air jet systems. They are available in 200 mm diameter brass or stainless steel frames and an extensive range of aperture sizes.
Grain Sieves
As used by Government Intervention Boards and similar organisations worldwide for testing grains and cereals. Available in 200 mm diameter brass or stainless steel frames with stainless steel slotted plate and a range of aperture sizes as specified in ISO 5223.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Calibrated Sieves |
|
|
The sieve is inspected in accordance with the specification. Each sieve is supplied with a calibration certificate or inspection certificates giving the range of tolerances and measurements taken.
Sieving
Sieving is sometimes referred to as the Cinderella of the particle-size analysis, because it performs most of the work but gets little of the credit.
New high-tech processes of Sedimentation, Laser Diffraction and Image Analysis get most of the headlines. Issues affecting the universal implementation of these methods vs. sieving are high instrument cost, calibration, extensive operator training and procedural discipline.
Sieving has occasionally a bad name because tests are sometimrs performed with subpar sieve mesh. Consequently, much has been made of obtaining sieves certified via ASTM or ISO mesh standards.
Sieve Certification
Optical approaches can accomplish this, either with a microscope or video image analysis. Results are presented in terms of maximum and minimum aperture size on the warp and on the weft, largest admissible openings and average openings. The number of openings measured is specified, means are calculated and a report is then generated.
The proscribed optical certification methods examine only a small number of the openings -- usually less than 1percent. For example, a 63-micron sieve has 2.5 million apertures; the ASTM method requires less than 1000 apertures. Opening size tolerances can exceed 10 percent. A 63-micron sieve has allowable tolerances of 12 microns or almost 20 percent.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Grid Sieves |
|
|
Grid sieve for flakiness testing of aggregates
Feature:
1:300 mm x 300 mm
2:Made entirely of Stainless Steel
3:Lightweight Construction
4:Strong and Anti-corrosive
5:Durable
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Mesh Certified Test Sieves |
|
|
If your process must have traceability or sieve testing is critical to your process or customer requirements, the Mesh Certified Test Sieve (MCTS) could be the solution. the manufacturing process is thorough and tuned to provide a consistent result. In addition, the MCTS are available at economical prices.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Mid-Point Test Sieves |
|
|
What Is A Mid-Point Sieve?
A mid-point test sieve has had the mesh inspected. The sieve is then selected as a mid-point if the results give tolerances that are in the middle of the ASTM Standard. For example, the ASTM permissible variations for the mesh of a No. 40 sieve (425μ) are:
1:Average Opening ±19μ.
2:Opening Dimension of 396μ not exceeded by more than 5% of the openings.
3:maximum individual opening 502μ.
The mid-point would have a variation in Average Opening of ±9.5μ, opening dimension of 396μ not exceeded by more than 2.5% of the openings and a maximum individual opening of 463.5μ. The effect of this tightened tolerance is an improvement in variation of approximately 30%. These results are traceable to a NIST standard.
Where Should Mid-Point Sieves Be Used?
When a process requires a high level of repeatability, mid-points can be used on all sieve tests. However, the predominant application for the mid-point sieves is as master stack. A master stack is used to check and recalibrate sieves used in everyday testing.
Summary
If your process must have traceability and the precision and repeatability of your sieve testing results is critical to your process or customer requirements, Mid-Point sieves should be considered for the master stacks and for every day testing of supercritical processes.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Perforated Plate Sieves |
|
|
Hengfeng manufacture a wide range of perforated plate sieves for the many industries that require them. These are available in diameter sizes of 200, 300, 315, 350, 400 and 450 mm.
Aperture sizes range from 125 mm to 4 mm in square hole and 125 mm to 1 mm in round hole.
Perforated plate sieves can be supplied in frame materials of either brass or stainless steel, and all are manufactured to the highest engineering standards to ensure quality and accuracy.
All 200 mm perforated plates are stainless steel. Larger Perforated plates in stainless steel on request.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Woven Wire Mesh Sieves |
|
|
Woven wire mesh sieves are the most widely used test sieves for all types of laboratory particle size analysis. They are made with only the highest quality materials and are available in diameter sizes of 38, 100, 150, 200, 250, 300, 315, 350, 400 and 450 mm, as well as 3, 8, 12 and 18 inches.
They can be supplied with aperture sizes ranging from 125 mm down to 20 μm and in full or half height versions.
Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated steel. Other materials and sizes can be produced to order.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
Working Sieves |
|
|
What Do We Mean By Working Sieves?
Because we carry high precision Mid-Point and Mesh Certified Test Sieves (MCTS) we need to make a distinction between them and the work-horse sieves used day to day. These sieves that do not require special inspection but need to conform to the basic standards of ASTM E-11, we call Working Sieves. The Working Sieves are available in Brass frames with brass or Stainless Steel mesh. We also supply stainless steel frames with stainless steel mesh. Working Sieves are available with 8 inch and 12 inch diameter frames. The frames are full height and one half height depths.
These sieves are constructed using ASTM standard wire cloth (mesh) and are supplied with a Certificate of Conformance. The mesh has not been individually inspected. Each sieve has a serial number which is related to a lot number.
Working Sieves are used in a diverse range of industries that include construction, mining, food, soil testing pharmaceuticals. They can be checked against master stacks, master samples or calibration spheres (beads) to test for wear or mesh damage.
There are no more economical and practical sieves for everyday use where extra tight and traceable standards are not required.
Summary
These Working Sieves are the intelligent choice for the application that has a limited requirement for traceability but needs a work horse sieve to perform on test after test.
|
|
| » Posted by: Hebei Hengfeng Test Sieves Factory [China] |
|
|
|
|
|
[Sell]
JZR 500H Diesel Concrete Mixer |
|
|
JZR500H Diesel Motor Concrete Mixer
Hydraulic tipping hopper
Adding a water pump for water circulation between water tank and water radiator, keep the water temperature to be stable;
Removing the air sucking point from the back to the front, reduce to suck the dust. It will be good to prolong the service life of the engine.
JZR500H Diesel Motor Concrete Mixer
Hopper lifting model: Hydraulic tipping hopper
Discharging volume 500L
Charging volume 750L
Water tank volume 140L
Capacity 18-22m3/h
Power source Diesel engine, single cylinder, water-cooled with battery starter
Power 16kw
Drum rotating-speed 13r/min
Max. dragging speed 20km/h
Dragging 4 tyres
Total weight 2050kg
Dimension 3750x2240x3800mm
|
|
| » Posted by: henen nf mechanical installation co.,ltd [China] |
|
|
|
|
|
[Sell]
QTZ500 Tower Crane |
|
|
| QTZ tower cranes are famous for their large operating ranges, varied working methods and wide uses. This series of tower cranes has a horizontal jib frame, a jib-trolley radius-changing mechanism and a hydraulic self-raising mechanism.3.It is original in design, reliable in operation and satisfactory in shape. Equipped with all necessary safety devices, these cranes show a good speed-control capacity, satisfactory operating stability and high work efficiency.They can be widely used for the construction of high-rise hotels, residential buildings, high-rise industrial buildings, large-span factory buildings and tower-like buildings like tall chimneys.The tower cranes have been awarded many honors like “NF FAMOUS BRAND”. “QUALITY FIRST” is not only a slogan; it is deeply rooted in the hearts of NF people.We also provide excellent after-sale service which will get rid of all your worries in the purchase of our products |
|
| » Posted by: henen nf mechanical installation co.,ltd [China] |
|
|
|
|
|
[Sell]
HBT60S1816-110 Trailer Concrete Pump |
|
|
| The NF S-valve series of high-pressure pumps, Z-gate-valve series of medium-pressure pumps and D-butterfly-valve series of low-pressure pumps are concrete transport machines widely used for the construction works in city construction, bridge construction, electric power and other energy source facilities and so on. The machines adopt world-level advanced technologies such as open hydraulic loop, distributing valve auto-compensation clearance, constant power control, all-hydraulic automatic reverse and electric proportional control. The company has carried out in-depth and meticulous studies and experiments in many aspects like the self-lubrication of concrete pistons and has obtained many patents. The NF trailer pump is a world-level new product which is developed on the basis of combining latest domestic and overseas technologies. NF trailer pumps cover three series and more than twenty models, so NF is a professional production base with all models and specifications of trailer pumps in CHINA, which can fully meet the various needs of all customers. |
|
| » Posted by: henen nf mechanical installation co.,ltd [China] |
|
|
|
|
|
[Sell]
jn1000 vertical |
|
|
jn1000 vertical
NF of JN series concrete mixer is Planetary Concrete Mixer, It is advanced designed and well manufactured. The plant is modular construction and easy to transport, install and dismantle. It can produce many kinds of concrete such as plastic and try concrete. Its main parts adopt well-known brands products. The mixer is twin shafts forced type having a fast speed and short mixing time. The rated working cycle is 60s. Its mixing plate and blade use wear-resistant ally cast iron and its mixing shaft adopts ally cast steel with long service life. Aggregate, cement, water and additive are well stirred. The aggregate is measured separately by scale and the cement, water and additive are weighted by special weighing hopper to guarantee the precision and accuracy. Electrical control system uses industrial touch screen control and computer control to guarantee the equipment operating smoothly. What’s more, we offer custom-made service for our customers. To meet different working condition, we also design and produce heat preserving and precooling concrete mixing plant.
The Mixing blades consist with multi stirring arms. It has not only rotation but also revolution movements. The complex mixing trajectory of mixing blades can cover the whole mixing area. All transmission system (including motor) on the top of stirring pot separated with concrete, which is easy to dismantle and repairing. There is no leakage.
Pot has a large room. The discharging gate controlled by the pneumatic or hydraulic system is easy to adjust the angle .There is a little space between the discharge gate and the concrete which can avoided that the door could not be opened due to longtime operation or irregular cleaning .Our Planetary concrete mixer can produce dry and rigid concrete (roller compacted concrete), building block, precast element, producing steel fiber concrete, color concrete and dry mortar.
|
|
| » Posted by: henen nf mechanical installation co.,ltd [China] |
|
|
|
|
|
[Sell]
hzs25 concret batching plant |
|
|
hzs25 concret batching plant
HZS series belt type concrete batching plants adopt YJS series concrete mixer or high duty JS series cement mixer;
Adopt high duty PLD series aggregate batching machine, at least include 4 aggregate bins;
Adopt intelligent control system, includes industrial monitoring system, accurate weighing system and error correction;
Adopt high capacity cement silo and screw conveyor for storage and feeding;
Optional Accessories based on customers’ requirement.
NF belt type concrete batching plant which is high-efficient equipment for ready mix concrete production.
The concrete batch plant can produce plasticity/dry-hard concrete with high productivity, and they are widely used in big/medium construction products, road, bridge project, and concrete prefabrication factory.
6. Aggregate batching machine: adopt independent storage bins and weighing hoppers, insure the production accuracy.
Main parts of NF belt type concrete batching plants:
1. Mixing system: Adopt YJS series twin-shaft concrete mixer with Italy tech for high quality of mixing effect, short mixing time and long service life of spare parts. We can also equip high duty JS series twin-shaft concrete mixer if customers need;
2. Platform: Mixing platform and weighing platform are separately installed, easy for client inspecting and maintenance;
3. Cement system: adopt plated cement silo and screw conveyor, easy for transportation and installation, well seal performance and long service life. We can also provide cement pump for bulk cement feeding to silo;
4. Weighing and control system: adopt new-design of electrical weighing system that includes computer control, digital display, etc. This kind of system also is equipped buffered device and auto-add function when weighing deflection, that will make sure the measurement accurate and timely.
5. Aggregate feeding system: adopt Belt Conveyor, is equipped ladder for worker maintenance or service;
Brief parameters introduction as following:
Model HZS60
HZS90
HZS120
HZS150
Theoretical productivity (m3/h) 60 90 120 150
Concrete Mixer Volume (L) 1000 1500 2000 3000
Concrete Mixer Power (KW) 2×18.5 2×30 2×37 2×55
Discharging Height(mm) 3900 3900 3900 3900
Max. Aggregate Size (mm) 60~80 60~80 60~80 80~100
|
|
| » Posted by: henen nf mechanical installation co.,ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
