|
|
|
|
|
|
|
[Sell]
Concrete Nails |
 |
|
Flat and countersunk head, diamond point, smooth shank and flut shank.
Concrete nails application:
Concrete nails are widely used for concrete walls, stone and masonry structure and other building construction purpose.
Concrete nails packing:
(1). In small box of 100 pcs each, 10 such boxes in a medium box, then several of which in a carton.
(2). In small box of 1kg each, 20 boxes in a carton.
(3). Loose in carton of 20/25kgs net.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete |
|
» Posted by: BWG Wire Nails Co. [China]  |
|
|
|
|
|
[Sell]
Galvanized Roofing Nails |
|
|
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
BWG supplies furniture nails of various sizes, mainly used in furniture making, furniture repair, cabinet work, casings, etc.
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted. |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Shoot Nails |
|
|
BWG supplies shoot nails ranges from wire diameter: 3.2mm - 3.7mm
Nail Length: 32mm, 42mm, 52mm, 62mm, 72mm
Packing: According to customers’ requirements.
We supply shoot nails in various sizes.
Technical Info:
Materials: Galvanized steel or copper coated
Shank Type: Square
Head: Conical Type
Uses: Commonly used in making of wood boat, etc.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
|
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Brad Head Nails |
|
|
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
bulletproof UD Fabric |
|
|
Our Unidirectional Fabric is formed by using current advanced international composite technology of unidirectional array of orthorhombic structure. Fiber arrangement is even, dense, tidy and smooth. This product is developed by Rongyi by using its competitive technology.
This product features soft quality, low specific gravity, waterproof, resistance to dampness and chemical corrosion, and anti-UV radiation, etc. It is popularly applied to light bulletproof jacket, body armor plate,ballistic helmet, explosion-proof shield, light hard armor and explosion isolation.
This product complies with GA-141-2001, standard of Ministry of Public Security. This product has approved by Ministry of Public Security as well as Bulletproof Equipment Quality Supervision and Inspection Center of China Arm Industry Ministry.And also passed the test NIJ Level IIIA of USA
160g/m2 1.2m*100m |
|
| » Posted by: Ningbo Rongyi Chemical Fiber Science&Technology Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Walk Through Metal Detector |
|
|
This is an advanced device which can detect metallic object being carried on body by the technology of electromagnetic field.
If the detected metallic object exceeds a certain size, this device will give an audio alarm. This device consists of a sensor, a control box and several antennas.
·This unit complies with EN50081-1, EN50082-1 and national standard:
METAL-DETECTING DOOR of GB15210
·Light weight, Easy to carry, Easy to be install and uninstall
·Be powered by a built-in rechargeable battery
Easy to Install
Specifications
Power:90~250V
Dimensions(W×L×T):0.7×2.0×0.5 m
Accessories
Outer frame：215cm(H)X70cm(W)
Inner frame：200cm(H)X60cm(W)
Machine net weight: about 35 kg
|
|
| » Posted by: HongKong SinBon Industrial Limited [China] |
|
|
|
|
|
[Sell]
Check Weigher |
|
|
Features:
Advanced DSP weigher unit, hight speed with steadily weigh
Used PLC control to keep data accurately on dynamic check weight
Used Touch Screen cooperation system, Chinese and English Language for choice, easy to operate
Detection logs and data can be input to computer or printer
Reject system for optional
Stainless Steel Structure for optiinoal
Application:
Used to check product weight on-line
Specification:
Detection Speed: 15packages/min.
Check Weight: 1kg-100kg
Size: 850mm×660mm×1250mm
|
|
| » Posted by: HongKong SinBon Industrial Limited [China] |
|
|
|
|
|
[Sell]
Industrial Metal Detector |
|
|
FEATURES
Digital signal processing technology, High Sensitivity
Multi-Functional Operation Interface
Advanced product auto-learn function
Memory 32 different types of products
Stainless Steel Structure meet HACCP requirement
Simple and easy maintenance conveyor
Optional Chinese/English/ Portuguese Language available
Optional Reject System
APPLICATION
Designed for detecting all kinds of metals in food, pharmaceutical products such as quick-frozen food, dehydrated vegetables, meat, cooked food, sauce etc.
Designed for detecting all kinds of metals in chemical, rubber, tobacco products etc.
Designed for keeping equipments safe to avoid equipments broken by metals.
|
|
| » Posted by: HongKong SinBon Industrial Limited [China] |
|
|
|
|
|
[Sell]
Stainless Steel Wire Mesh |
|
|
Woven wire mesh and wire cloth in stainless steel or other metals are mainly used as filter wire mesh, filter wire cloth or wire mesh screen. Stainless steel wire mesh is also written as stainless steel mesh, stainless wire mesh, stainless steel wire mesh cloth, stainless steel mesh screen, stainless steel wire netting mesh or stainless steel woven mesh. We introduce stainless steel wire mesh manufacturers and related information on stainless steel woven wire mesh and materials here.
Variety According to Processing Difference:
1, Woven Stainless Steel Mesh:
Stainless Steel Square Opening Wire Mesh ( Plain Woven & Twilled Woven)
Fine Filtration Wire Mesh Filter Cloth (Dutch Plain Woven, Dutch Twilled Woven, Five-Heddle Woven & Dutch Reverse Woven)
2, Welded Stainless Steel Wire Mesh
3, Twisted Hexagonal Wire Netting in Stainless Steel
4. Crimped Stainless Steel Wire Mesh Screening
5. Perforated Metal Sheet in Stainless Steel
6. Expanded Metals in Stainless Steel
Stainless steel wire mesh can be divided into stainless steel insect screening, stainless steel wire mesh filters, stainless steel woven fencings, etc.
Stainless Steel Wire Materials for Stainless Steel Woven Wire Mesh & Wire Cloth:
Stainless Steel Wire Type 304
Often referred to as "18-8" (18% chromium, 8% nickel) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
Type 304 L
Stainless Steel Wire Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics.
Type 316
Stainless Steel Wire Type 316 is stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy.
Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304.
Wire cloth woven of stainless steel wire T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types.
Type 316 L
Type 316 L Stainless Steel Wire is very similar to T-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.
Applications of Stainless Steel Woven Wire Mesh and Wire Cloth: Sifting and filtering in acid and alkali conditions. Slurry net in petroleum, sifting and screening mesh in chemical and chemical fiber industry, acid washing mesh in electric plating industry.
|
|
| » Posted by: Wire Mesh Manufacturers [China] |
|
|
|
|
|
[Sell]
Mobile Type Vacuum Transformer/Insulating Oil Purification Trailer |
|
|
(Contact: Catherine Huang, Tel: 0086-23-68060729, Fax: 0086-23-86197078, Mobile: 0086-13512336824, Yahoo Mail (Gmail) ID: hlrcatherine, Company Mail: oilpurifier.cathy@zhongnengcq.cn, MSN: hlrcatherine@hotmail.com, Alibaba Trademanager ID: hlrcatherine, Skype: hyt728, Yahoo Messenger ID: hlrcatherine Web: http://hyt728.diytrade.com)
The Mobile Regeneration System (Model ZYM) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYM system provides regular oil purification such as degassing, drying and particulate removal but its main application is in the removal of acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. The ZYM Model is mounted on a leak proof base and can be installed and operated on a trailer.
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. Programmable Logic Controller (P. L. C)
3. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time.
4. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.
Advantages:
It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, PH value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on.
We supply kinds of industrial oil purifier, such as lubricant oil purifier, transformer oil purifier, turbine oil purifier, engine oil purifier, hydraulic oil purifier, diesel/fuel oil purifier etc. Any of your requirement is highly welcomed, we are ready to reply your inquiry promptly.
(oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Mobile Type Vacuum Transformer/Insulating Oil Purification Trailer |
|
|
(Contact: Catherine Huang, Tel: 0086-23-68060729, Fax: 0086-23-86197078, Mobile: 0086-13512336824, Yahoo Mail (Gmail) ID: hlrcatherine, Company Mail: oilpurifier.cathy@zhongnengcq.cn, MSN: hlrcatherine@hotmail.com, Alibaba Trademanager ID: hlrcatherine, Skype: hyt728, Yahoo Messenger ID: hlrcatherine Web: http://hyt728.diytrade.com)
The Mobile Regeneration System (Model ZYM) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYM system provides regular oil purification such as degassing, drying and particulate removal but its main application is in the removal of acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. The ZYM Model is mounted on a leak proof base and can be installed and operated on a trailer.
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. Programmable Logic Controller (P. L. C)
3. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time.
4. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.
Advantages:
It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, PH value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on.
We supply kinds of industrial oil purifier, such as lubricant oil purifier, transformer oil purifier, turbine oil purifier, engine oil purifier, hydraulic oil purifier, diesel/fuel oil purifier etc. Any of your requirement is highly welcomed, we are ready to reply your inquiry promptly.
(oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Waste/Used Turbine Oil Purification, Oil Filtration, Oil Separation Machine |
|
|
(Contact: Catherine Huang, Tel: 0086-23-68060729, Fax: 0086-23-86197078, Mobile: 0086-13512336824, Yahoo Mail (Gmail) ID: hlrcatherine, Company Mail: oilpurifier.cathy@zhongnengcq.cn, MSN: hlrcatherine@hotmail.com, Alibaba Trademanager ID: hlrcatherine, Skype: hyt728, Yahoo Messenger ID: hlrcatherine Web: http://hyt728.diytrade.com)
Application
The products absorb free carbon, gelatinous substance by macromolecule to reduce the cost and advance product quality. It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This products, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil’s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil’s nature.
Features
1.The capacities of dehydration and degas are great, and assure of eliminating kinds of gas.
2.To absorb free carbon, gelatinous substance by macromolecule to reduce the cost and advance product quality.
3.Prolong the life of the device
4.Breaking emulsification thoroughly with high- molecule polymeric material.
5.Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
We supply kinds of industrial oil purifier, such as lubricant oil purifier, transformer oil purifier, turbine oil purifier, engine oil purifier, hydraulic oil purifier, diesel/fuel oil purifier etc. Any of your requirement is highly welcomed, we are ready to reply your inquiry promptly.
(oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Best Solution For Waste/ Used Car Engine Oil, Motor Oil, Fuel Oil |
|
|
Contact Person: Cathy Huang
Email: hlrcatherine@yahoo.com or hlrcatherine@gmail.com, oilpurifier.cathy@zhongnengcq.cn
MSN:hlrcatherine@hotmail.com
Alibaba Trademanager ID: hlrcatherine
Yahoo Messenger ID: hlrcatherine
Skype: hyt728
Mobile: 0086-13512336824
Tel: 0086-23-68060729
Fax: 0086-23-86197078
Web: http: //hyt728.ec51.com
Application:
LYE series oil filter machines cannot only remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the color of the treated oils looks like the new one, the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series machines are special for recycling kinds of engine oil used in ships, cars and other vehicles.
Features
1.Strong capability of breaking emulsification.
2.The combination of coalescing separation and vacuum dewatering.
3.More Deeply and precisely FH rectangle filtering system. The oil will reach to the new oil’s nature when it was purified.
4.Zhongneng’s unique technology with H.P.M high molecule absorption material.
5.Besides the common vacuum oil purifier’s function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively.
Contact Person: Cathy Huang
Email: hlrcatherine@yahoo.com or hlrcatherine@gmail.com, oilpurifier.cathy@zhongnengcq.cn
MSN:hlrcatherine@hotmail.com
Alibaba Trademanager ID: hlrcatherine
Yahoo Messenger ID: hlrcatherine
Skype: hyt728
Mobile: 0086-13512336824
Tel: 0086-23-68060729
Fax: 0086-23-86197078
Web: http: //hyt728.ec51.com
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Two-Stage Transformer Oil, Insulating Oil Purifier, Oil Separation |
|
|
Contact Person: Cathy Huang
Email: hlrcatherine@yahoo.com or hlrcatherine@gmail.com, oilpurifier.cathy@zhongnengcq.cn
MSN:hlrcatherine@hotmail.com
Alibaba Trademanager ID: hlrcatherine
Yahoo Messenger ID: hlrcatherine
Skype: hyt728
Mobile: 0086-13512336824
Tel: 0086-23-68060729
Fax: 0086-23-86197078
Web: http: //hyt728.ec51.com
Application
This machine is applied to treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110V, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line.
Features:
1. High vacuum: High point-Vacuum is not more than 5pa Working-vacuum is not more than 35pa
2.High absorption speed: Absorption speed power is not less than 333L/Sr.
3.Duplex 3D stereo-evaporation, eliminating the liquid water quickly
4.UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
5.Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
6.Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment
7.Especially applied to vacuum oiling and drying for power transmission equipments that are over 110KV
8.The oil of any grades can be treated on line at the working site.
We supply kinds of industrial oil purifier, such as lubricant oil purifier, transformer oil purifier, turbine oil purifier, engine oil purifier, hydraulic oil purifier, diesel/fuel oil purifier etc. Any of your requirement is highly welcomed, we are ready to reply your inquiry promptly.
(oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)
Other models for your convenient reference:
For insulating oil (transformer oil,mutual inductor oil,valve oil)
-Highly effective vacuum oil purifier series ZY
-Computer-tested highly effective vacuum oil purifier series ZYA
-Multi-function transformer oil treatment machine series ZYB
-Double-stage highly effective vacuum transformer oil purifier series ZYD
-Double-stage transformer oil purification®eneration plant ZYD-R
-Mobile Type transformer oil purification&recycling plant ZYM
For lubricant oil(hydraulic oil,gear oil,heating oil,engine oil and so on)
-Automatic lubricant oil purification&recycling palnt TYA
-Phosphate ester fire-resistant oil purifier TYA-I
-Vacuum lubricant oil regeneration plant LY-R
-Highly effective vacuum engine oil purifier LYE
-Highly effective vacuum turbine oil purifier series TY
-Vacuum turbine oil regeneration purification plant series TY-R
-Oil purifier special for fuel oil,diesel oil,gasoline oil and light lubricant oil TYB series
Other kind plant related:
-Portable oil purifying and oiling machine series JL
-Transformer oil regeneration device BZ series
-Automatic testing oil machine IIJ
-Plate pressure oil purifier plant PL
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Oil Purifier, Oil Separation Plant For Emulsified Hydraulic Oil, Lubricant Oil, Gear Oil |
|
|
Contact Person: Cathy Huang
Email: hlrcatherine@yahoo.com or hlrcatherine@gmail.com, oilpurifier.cathy@zhongnengcq.cn
MSN:hlrcatherine@hotmail.com
Alibaba Trademanager ID: hlrcatherine
Yahoo Messenger ID: hlrcatherine
Skype: hyt728
Mobile: 0086-13512336824
Tel: 0086-23-68060729
Fax: 0086-23-86197078
Web: http: //hyt728.ec51.com
We supply kinds of industrial oil purifier, such as lubricant oil purifier, transformer oil purifier, turbine oil purifier, engine oil purifier, hydraulic oil purifier, diesel/fuel oil purifier etc. Any of your requirement is highly welcomed, we are ready to reply your inquiry promptly.
(oil filtration, oil processing, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)
Application
Series TYA is special for purifying all kinds of lubricating oil such as the hydraulic oil, mechanical oil, coolant oil, gear oil, and heat treatment oil and so on. This machine can operate automatically (don’t need the person when it is working). According to the lubricating oil’s nature, this machine can rapidly remove water, gas, particulate matters and impurities from lubrication oil, so guarantee lubricating system of machine to work properly and prolong lifetime of machine.
Features
1. Strong capability of breaking emulsification.
2. The combination of coalescing separation and vacuum dewatering.
3. More Deeply and precisely FH rectangle filtering system. The oil will reach to the new oil’s nature when it was purified.
4. Zhongneng’s unique technology with H.P.M high molecule absorption material.
Other models for your convenient reference:
For insulating oil (transformer oil,mutual inductor oil,valve oil)
-Highly effective vacuum oil purifier series ZY
-Computer-tested highly effective vacuum oil purifier series ZYA
-Multi-function transformer oil treatment machine series ZYB
-Double-stage highly effective vacuum transformer oil purifier series ZYD
-Double-stage transformer oil purification®eneration plant ZYD-R
-Mobile Type transformer oil purification&recycling plant ZYM
For lubricant oil(hydraulic oil,gear oil,heating oil,engine oil and so on)
-Automatic lubricant oil purification&recycling palnt TYA
-Phosphate ester fire-resistant oil purifier TYA-I
-Vacuum lubricant oil regeneration plant LY-R
-Highly effective vacuum engine oil purifier LYE
-Highly effective vacuum turbine oil purifier series TY
-Vacuum turbine oil regeneration purification plant series TY-R
-Oil purifier special for fuel oil,diesel oil,gasoline oil and light lubricant oil TYB series
Other kind plant related:
-Portable oil purifying and oiling machine series JL
-Transformer oil regeneration device BZ series
-Automatic testing oil machine IIJ
-Plate pressure oil purifier plant PL
|
|
| » Posted by: ZH-Neng Oil Purifier Manufacture Co.,Ltd [China] |
|
|
|
|
|
[Sell]
european truck parts |
|
|
Detailed Product Description
Complete range of auto spare parts for benz man volvo scania daf truck and trailers.
Cylinder Heads,
Bearings,
Piston and Piston Rings
Valves
Fuel injection lines,
Fuel pump,
Water Pumps, Fans, Water pump repair kits
Alternators,Starters, Field Coils, Aramature, Solenoid Switch,
Steering Pumps, Drag links, Tie rod ends etc
Mountings
655 241 0613
655 241 1113
655 241 0713
655 241 1213
000 241 0113
000 241 0513
000 241 0613
387 240 0017
387 240 0317
387 240 0417
621 240 0717
620 240 0317
658 241 0013
000 242 1213
652 240 0318
655 240 0118
387 240 0218
387 240 0418
617 240 0318
617 240 0418
617 240 0518
645 240 0018
645 240 0118
645 240 0218
645 240 0318
645 240 0418
941 241 5113
941 241 5713
Part Numbers indicated are for reference purpose only.
Detailed Product Description
Armature:
O.E.Ref : 000 151 3915
O.E.Ref : 000 151 4015
Starter :
O.E.Ref : 000 151 4101
Appl: 400 series, 24v,6.6Kw
O.E.Ref : 001 151 3901
Appl: 355, 24 V, 5.4 Kw
Field Coil:
O.E.Ref: 000 151 7055
O.E.Ref : 001 151 3055
Rectifier:
O.E.Ref: 000 154 6016
Appl: OM 314,355,401,402,422
O.E.Ref: 000 154 7016
Appl: OM 401 LA / EU1,422A
Flasher:
O.E.Ref: 001 544 7432
Type: 11Pin
O.E.Ref : 002 544 8032
Type: 6 pin
Alternator:
O.E.Ref: 0120 469 982
Type : 24V, 55A
O.E.Ref:0120 489 728
Type : 24V, 27A
Detailed Product Description
Connecting Rod
O.E.Ref: 422 030 0420
Appl: OM 402,403,422
O.E.Ref: 355 030 2820
Appl: 355 / 355A
Piston Assy:
Mahle Ref : 003 54 00
O.E.Ref : 355 030 7917
Type: Dia 128 mm
Appl: OM 355
Mahle Ref: 003 54 12
Type : Dia.128.50 mm
Mahle Ref : 51495
Type: Dia 129 mm
Mahle Ref: 003 66 80
O.E.Ref : 423 030 1237
Type: Dia.128 mm
Mahle Ref: 003 76 93
O.E.Ref: 442 030 0437
Fly Wheels :
Type : Dia 380mm, 420mm,430mm
Part Numbers indicated are for reference purpose only.
GENERAL OWNER:
MUHAMMET TUNC
GENERAL MANAGER:
EYUP TUNC
|
|
» Posted by: TUNC OTOMOTIV DIS TICARET LTD STI [Turkey]  |
|
|
|
|
|
[Sell]
sell pneumatic rock drill YT28 |
|
|
Sanhe Qiangli Pneumatic Machinery Co.,Ltd is founded in 1995,always servicing for the Chinese State-hold Mine and local users.
Now he turns his aim to international market. After 13 years' technicals and development,we will service all of the global users with our reliable products as what we did during last 13 years.
Quality need to be tested and price is visible.
|
|
| » Posted by: Tianjin Qiangli Pneumatic Tools Commerce & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
sell pneumatic rock drill YT28 |
|
|
Sanhe Qiangli Pneumatic Machinery Co.,Ltd is founded in 1995,always servicing for the Chinese State-hold Mine and local users.
Now he turns his aim to international market. After 13 years' technicals and development,we will service all of the global users with our reliable products as what we did during last 13 years.
Quality need to be tested and price is visible.
|
|
| » Posted by: Tianjin Qiangli Pneumatic Tools Commerce & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
sell pneumatic rock drill YT28 |
|
|
Sanhe Qiangli Pneumatic Machinery Co.,Ltd is founded in 1995,always servicing for the Chinese State-hold Mine and local users.
Now he turns his aim to international market. After 13 years' technicals and development,we will service all of the global users with our reliable products as what we did during last 13 years.
Quality need to be tested and price is visible.
|
|
| » Posted by: Tianjin Qiangli Pneumatic Tools Commerce & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
sell pneumatic rock drill YT28 |
|
|
Sanhe Qiangli Pneumatic Machinery Co.,Ltd is founded in 1995,always servicing for the Chinese State-hold Mine and local users.
Now he turns his aim to international market. After 13 years' technicals and development,we will service all of the global users with our reliable products as what we did during last 13 years.
Quality need to be tested and price is visible.
|
|
| » Posted by: Tianjin Qiangli Pneumatic Tools Commerce & Trade Co.,Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 next»
|
|
|
